(Here is the Hai Kaishi weighing transducer blocks weighing transmitter) LCT-PRO's features and technical parameters.
LCT digital weighing transmitter module features

◆ 6-digit LED digital display weighing data
◆ Low temperature drift
◆ Compact
◆ Optional button or PC driver software operating
◆ address can be set to achieve up to 99 networked
◆ DIN35 rail mounting
◆ CAN bus :0-20mA ,4-20mA ,0-5V ,1-5V ,0-10V ,1-10V (six check one)
◆ Input Control: 4 opto-isolated switch inputs, each channel can be configured for peeled, cleared, NW GW conversion
◆ Output Control: 4 isolated relay outputs, each channel can be configured for high limit, high limit, low limit, Low-Low Limit, CAN bus, RS232/RS485 communication port (alternative)
◆ digital / physical calibration optional serial
◆ PWC one weighing module can be individually controlled devices supporting other

LCT technical parameters

◆ Sampling rate: up to 100 times per second
◆ Internal resolution: 16,000,000
◆ sensor excitation voltage: DC 10V ± 5%, providing 150 mA maximum current
◆ Maximum display sub-degree: 50,000 sub-degree
◆ display sub-degree spacing: 1,2,5,10,20 or 50
◆ Output Sensitivity: 0.5μV / cell ~ 200μ / cell
◆ Adjustable Zero Voltage Range: 0.08mV ~ 15.0mV
◆ Span stability: the reading of ± 8ppm / k;
◆ Temperature Coefficient: ≤ (0.0008% of reading +0.3 indexing) / ℃
◆ non-linear error: ≤ 0.005% of full scale
◆ Sampling method: Delta-sigma method

Transmission module weighing applications: especially suitable for the use of PLC or PC control system, tension measurement, batching scales, weight loss scale, spiral scales, belt scales, crane scales, dynamic balance, a variety of platform scales, weighing material level , packing scale, pull pressure, torque testing equipment, all analog resistive strain sensor precision signal conversion, supporting CI5010a or NT570 series using